Starting up
56
APS09_013_0404GB
"
Switch on the ignition by turning the ignition key to "1".
å
All pictograms on the operating module flash three times
(self test)
å
After the self test, the green LED lights up permanently.
å
The status of all inputs is displayed at the same time.
"
Start the motor by turning the ignition key to "2" on the ignition
lock.
"
Deactivate the choke lever after a brief warming−up period.
Note
The engine speed is controlled depending on the load. There is no
accelerator control, the engine controls the speed depending on the
load.
You can check the different machine functions while the motor is
running.
"
Check all joints on the machine for leaks.
"
Set the working pressure on the unloader and check whether
the machine reacts to changes.
å
Changes in pressure can be viewed on the pressure gauge
when the spray gun is actuated.
"
When actuating the high−pressure pistol, check whether the
motor reacts with an increase in speed.
Continuation next side
Checking functions
