Pilot Operating Handbook
H3 Sport 135 HP
SECTION 8
MAINTENANCE
Dynali_POH_H3 Sport 135 HP Rev. 3.3 – Issue date 15.01.2021 Page
72
8.3
MAINTENANCE LOGBOOK
All maintenance work must be logged in the appropriate logbook which must contain,
at the least, the following information :
Ø
Date of performance of the work.
Ø
Number of hours flight logged.
Ø
Description of the work and remarks.
Ø
Name of the technician.
Ø
Supervisor signature.
NOTE
Telephone contact with Dynali Helicopter Company is always possible, if any
doubt subsists or if there is any doubt concerning the work.
8.4
MAINTENANCE AND PROCEDURES
Dynali SPRL requires that the maintenance inspections should be made :
1)
Every 25h. The pilot may perform this after having followed a training
course with an authorised distributor.
2)
Every 50h. The pilot may perform this after having followed a training
course with an authorised distributor.
3)
Every 100h. This operation must be performed in an authorised
maintenance center by a qualified technician.
4)
Every 300h. This operation must be performed in an authorised
maintenance center by a qualified technician.
5)
Every 600h. This operation must be performed in an authorised
maintenance center by a qualified technician.
6)
Every 1200h. This operation must be performed in an authorised
maintenance center by a qualified technician.
7)
Every 2400h. This operation must be performed in an authorised
maintenance center by a qualified technician.
Dynali SPRL recommends a full inspection of the machine every 12 months. This must
be performed by an authorised maintenance center.
Furthermore as from the 50
th
hour, the operation to be undertaken is, in fact, a series
of operations. For example, after 2400 hours, all the maintenance operations included
in the 25h, 50h, 100h, 300h, 600h, 1200h and 2400h checks must be performed.
Summary of Contents for H3 Sport 135 HP
Page 85: ......
