A 1129A
HDMI RF Digital DVB-T Modulator
ATTENTION!
FOR THIS CONFIGURATION YOU SHOULD USE OUTPUT FREQUENCIES DIFFERENT
FROM THE ONES THAT YOUR TV IS CURRENTLY USING.
3. Navigation
The instrument is configured through its 6 keys and front panel display.
In general, it is not necessary to configure the instrument to generate a
DVB-T signal compatible with any digital terrestrial television receiver.
Installation
1. Power Supply:
Connect the external power supply to the 100~230V mains and the 12V
to the DC input.
Once connected to power, the device turns on and it takes about 30
seconds to be operational. Then the message “Keyboard Locked”
appears on the display.
2.Connection Diagram: