Default Configuration for New Zealand
This Router is shipped with the following factory default settings.
Router IP address
192.168.1.1
Subnet mask
255.255.255.0
VPI
0
(do not change)
VCI
100
(do not change)
Encapsulation
PPPoA VC-MUX
(do not change)
NAT
enabled
(do not change)
DSL line mode
auto
WAN IP
dynamic
DHCP enabled
UPnP IGD
disabled
Security:
Firewall
off
Intrusion Detection
disabled
Router configuration & management:
Administrative User name
admin
Administrative Password
admin
Telnet password
admin
Users must not change the VPI, VCI, Encapsulation or NAT settings. DSL line
mode can be set to either auto or G.dmt. Advanced users who have other setup
preferences should refer to the
User’s Manual
.
Before you start
Make sure your computer has the following installed:
An Ethernet or USB port (see ‘Choose your connection option’ below)
TCP/IP protocol
A web browser, Internet Explorer 5.0/Netscape 6 or better
Obtain the following information from your ISP:
Login user name and password
Public IP address (Note: only required if you purchase a static IP)
DNS server IP address (if specified by ISP)
Choose your connection option:
Ethernet (for a standalone computer)
Connect using the enclosed "straight through" Ethernet cable.
1
2
ADSL Router
Quick Set-up Guide
