Page 4
2282-TJ82 MANUAL - FORM 2282TJ-001
MODEL 2282-TJ82 DOUBLE/INSWING
ELECTROMAGNETIC LOCK
INSTALLATION INSTRUCTIONS
2/07
705 Emmett Street Bristol, CT 06010
1-877-DynaLock www.dynalock.com
ATTACH THE ARMATURES TO THE ARMATURE MOUNTING BRACKETS
ASSEMBLE THE ARMATURE MOUNTING BRACKETS
Locate two 1/4-20x1/2” armature mounting
bracket assembly screws and lock washers
from the hardware kit and assemble the
bracket as shown.
Firmly tighten the mounting screws with a
5/32” hex wrench. They may be loosened
later for adjustment, as necessary.
Repeat for second bracket.
Attach the Armature Housing to the top Armature Mounting Bracket using four (4) 8-32x3/8” Armature Housing
Screws. Attach the armature to the armature mounting bracket as shown. Firmly tighten the Armature Mounting
Screw using a 3/16” hex wrench.
Repeat for second bracket.
Failure to properly secure the armature to the bracket could result in
serious injury or possible security breach.
UPPER ARMATURE
BRACKET
LOWER ARMATURE BRACKET
LOCK WASHER
BRACKET ASSEMBLY SCREW
ARMATURE
SPACER
FLAT
STEEL WASHER
ARMATURE
MOUNTING
SCREW
ARMATURE MOUNTING BRACKET
ARMATURE HOUSING
ARMATURE
ARMATURE HOUSING SCREW
