2511 BILL OF MATERIAL
TOOLS REQUIRED
1. Magnet Assembly
2. Armature
3. Access Cover Assy.
4. End Cover
5. Mounting Screw
6. Anti-tamper Plug
7. Armature Spacer
8. Rubber Washer
9. Anti-spin Pin
10. Steel Washer
11. Armature Bolt
12. Door Spacer
13. Sex Nut
Consult Factory
#300141
Consult Factory
#300165
DESCRIPTION PART NUMBER
1 - Electric Drill
1 - #2 Phillips Head Screw Driver
1 - Soft-faced Mallet
1 - 3/16" Hex Wrench
1 - 11/32" Drill Bit
1 - 21/32" Drill Bit
1 - 9/16" Drill Bit
1 - 1/8" Drill Bit
1 - 17/64" Drill Bit
1 - 1/4" Drill Bit
1 - Hammer
1 - Center Punch
Pencil & Tape
1 - Mounting Instructions
1 - Wiring Instructions
1 - Electromagnetic Lock
1 - Hardware Kit consisting of:
4 - #10 x 1" Phillips Flat Head
self-tapping screws
4 - Anti-tamper Plugs
1 - 1/4" long Armature Spacer
1 - 1/8" thick Rubber Washer
1 - 1/16" thick Steel Washer
2 - 3/16" x 3/4" long Anti-spin Pins
1 - Template
1 - Armature Bolt assembly
consisting of:
1 - 5/16-18 x 2" Hex flat
head machine screw.
1 - 5/16-18 Sex Nut
1 - 1-11/16" long Door
Spacer
1 - Armature
page 4
2511
Hardware Kit
Part #300762
EXPLODED VIEW
012500
2511manual.CDR
1
1-1/4"
1-3/4"
10-1/2"
6
5
4
3
7
8
10
11
2
9
6-1/2"
1-1/2"
3/8"
12
13
