Embedded Solutions
Page 5
Product Description
cPCIBPMC6U is part of the Dynamic Engineering cPCI and PMC Compatible
family of modular I/O components. cPCIBPMC6U adapts two PMC modules into
one cPCI slot.
cPCIBPMC6U has a “sister” product for 3U applications – cPCIBPMC3U32. The
3U version has a 32 bit PCI interface definition and can work in a 64 bit
environment.
Voltages are monitored and the associated LEDs illuminated when the
corresponding voltages are within tolerance.
5V and 3.3V power planes are filtered through an LC network. 1A per pin on the
3.3 and 5V planes [more than 10A each], plus 1A+ on the +/- 12V connections.
Special features:
• Universal cPCI 6U 4HP.
• Extended temperature range [-40 +85C] components
LED names within quotes
: (visible on bezel)
• LED on PMC Busmode “LPMC0” & “LPMC1”
• LED on plus 12V “L12V”
• LED on minus 12V “LM12V”
• LED on plus 5V “L5V”
• LED on plus 3.3V “L3p3V”
• User selectable secondary VIO.
• 32 bit operation on PCI bus
• 66 or 33 MHz operation. With 66 MHz. primary bus speed the secondary bus
can be 66 or 33 MHz.
• Front panel connector access through cPCI bracket
• JTAG programming support option for position 0
• GPIO header option
• Rear Panel IO option
cPCIBPMC6U is ready to use with the default settings. Just install the PMC(s)
onto cPCIBPMC6U and into the system. There are a few settings to optimize
performance.
