5
BCDEFGH
Copyright © 2014 - 2022 by Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Use the lens shift of your projector to adjust the position of the
projected image on the mirror as shown in the illustration.
(Mirror position for adjustment = power on position)
Adjust lens shift
Tilt-Motor
Axis
1.
Surface coated mirror
2.
Mirror Head control unit
3.
Mirror Head base plate
4.
Tilt motor
5.
Reference magnets
6. Motor-drive-arm
7.
Reference screws
8.
Pan drive shaft
2
7
1
4
8
6
Mirror Head control unit / MHE01
Backside view
Top view
Elektronik Frontansicht komplett
all rights reserved by
www.dynamicprojection.com
25.08.14
Neumann
GEWICHT:
A3
BLATT 1 VON 1
MASSSTAB 1:1
ZEICHNUNGSNR.
BENENNUNG:
ÄNDERUNG
ZEICHNUNG NICHT SKALIEREN
WERKSTOFF:
DATUM
SIGNATUR
NAME
ENTGRATEN
UND SCHARFE
KANTEN
BRECHEN
OBERFLÄCHENGÜTE:
WENN NICHT ANDERS DEFINIERT:
BEMASSUNGEN SIND IN MILLIMETER
OBERFLÄCHENBESCHAFFENHEIT:
TOLERANZEN:
LINEAR:
WINKEL:
QUALITÄT
PRODUKTION
GENEHMIGT
GEPRÜFT
GEZEICHNET
DMX OUT
DMX IN
ARTNET / LAN
RS 232
MENU
ENTER
AC OUT
AC IN
Mirror Head
Model: MHE01
3
4
5 6
7
10
8
2
1
10
9
1. DMX-OUT / Through Socket - 5 Pins XLR
2. DMX-IN Socket - 5 Pins XLR
3. Art-Net™ network - 10Mb/s, 100Mb/s
4. Mini USB OTG - for firmware update
5. RS232 connector - male
6. A/C power output; loop trough, 3-prong C13 female socket
7. A/C power input; 100V / 2A / 60Hz - 240V / 1A / 50Hz, 10A max. 3-prong C14 male socket
8. Control buttons for menu navigation
9. LCD display
10. Control unit
QIG - Version 2.6
Mirror Head Quick Installation Guide
For the full manual please visit
http://dynamicprojection.com/mirror-head-assembly
