Dynamic Saunas DYN6215-01, Owner'S Manual

11 

B.   Installing the FLOOR PANEL  

1.  Place the FLOOR PANEL on the floor.  

Some models have wood braces that must be 

installed on the underside of the FLOOR PANEL.  Not all models have these.  

Please 

check to see if such wood braces were packed in the box containing the FLOOR PANEL.  If 

so, mount according to the designated “A”, “B”, or “C” labels 

located on the underside of the 

FLOOR PANEL.  Once installed, turn the FLOOR PANEL right side up.  Make sure the front 

side of the FLOOR PANEL is facing the correct direction.  (see Panel Descriptions)  (Note: 

The floor heater cord is located at the rear of the sauna room.)  (see Figure 8) 

                                  Floor Heater Cord               

Figure 8 

C.  Installing the FRONT WALL PANEL, RIGHT SIDE WALL PANEL and LEFT SIDE WALL        
       PANEL 

1.  Place the FRONT WALL PANEL up against the FLOOR PANEL.  Align the Metal Guide Insert 

Brackets on the FRONT WALL PANEL and the RIGHT SIDE WALL PANEL.  The RIGHT 
SIDE WALL PANEL will need to be lifted in order to lock the Metal Guide Insert Brackets onto 
the FRONT WALL PANEL.  Secure into place by pulling downward on the RIGHT SIDE WALL 
PANEL.  Make sure the Metal Guide Insert Brackets are locked into place and the top of the 
FRONT WALL PANEL is flush with the RIGHT SIDE WALL PANEL.  Do the same for the 
LEFT SIDE WALL PANEL.  (see Figure 9) 

                                                                                Figure 9