Dynamic 91148X72MMAG Installation Manual Download

Page: 3 / 3

Description

- 3 -

6. Then insert the end caps

(H5) into the vertical and

bottom posts

5. Slide the board downward until the board

rests on the vertical post's designated notch.

TO FLIP BOARD:

To flip board, rotate knob below the

horizontal bar until it disconnects from

board. Then once the board is flipped

rotate the knob until it connects to board.

Summary of Contents for 91148X72MMAG

Page 1: ...H4 4 Locking Caster Hex Bolts M8x64mm Hex Bolts M8x40mm Washer End Cap Self tapping Screw Screwdriver Wrench 4 12 6 6 2 1 1 H5 H6 H7 H8 1 1 Screw four locking casters H1 into two bottom posts by hand...

Page 2: ...ng Caster Hex Bolts M8x64mm Hex Bolts M8x40mm Washer End Cap Self tapping Screw Screwdriver Wrench 4 12 6 6 2 1 1 H5 H6 H7 H8 3 Connect top horizontal posts to two vertical posts by Hex Bolts H4 4 Con...

Page 3: ...ts 5 Slide the board downward until the board rests on the vertical post s designated notch 5 TO FLIP BOARD To flip board rotate knob below the horizontal bar until it disconnects from board Then once...