1.
Liquid Crystal Display (LCD):
The LCD allows you to see the
operating menu functions
2.
ON/OFF:
When the ON/OFF button is pressed, the massage
chair will enter standby mode. The LCD screen will show HMI or
the running status. When the ON/OFF button is pressed during
operation, the massage chair will reset back to the initial
settings.
3.
STOP:
When the STOP button is pressed, all of the airbags will
deflate and all functions will stop. The STOP button should be
used in case of emergency or malfunction of the massage chair.
4.
AUTO:
When the AUTO button is pressed, you will enter the
AUTO menu. You will be able to select your desired functions.
5. FOOT:
When the FOOT button is pressed, you will be able to
operate the foot massage options.
6.
MANUAL:
When the MANUAL button is pressed, you will enter
the MANUAL menu. You will be able to select your desired
functions.
7. AIR:
When the AIR button is pressed, the menu will allow you to
select specific air massage functions.
8. ENTER:
The arrow keys move the cursor on the LCD screen.
You press the ENTER to confirm a selection in the menu.
9. MASSAGE RANGE:
The CUSTOMIZE button allows you to
store your edited massage selections as your desired AUTO
program.
10. ROLLER STRENGTH:
When you press the ROLLER
STRENGTH button, you can adjust the roller strength.
11. AIR PRESSURE:
When you press the AIR PRESSURE
button, you can adjust the air pressure strength.
12. ADJUST THE CHAIR:
These buttons will adjust the chair back
up/down, the footrest up/down, and reset the chairback and
footrest.
o
Do not splash water or any other liquid onto the massage chair or controller.
o
Do not operate the massage chair with wet hands.
o
To not sit, drop, or tamper/dismantle the controller. Do not pull excessively on the
controller wire.
o
Do not bring the controller, including the LCD monitor, within contact of any sharp objects
as it may cause damage.
-8-
