o
Do not splash water or any other liquid onto the massage chair or controller.
o
Do not operate the massage chair with wet hands.
o
To not sit, drop, or tamper/dismantle the controller. Do not pull excessively on the
controller wire.
o
Do not bring the controller, including the LCD monitor, within contact of any sharp objects
as it may cause damage.
Before Use
This massage chair may be packaged with the backrest folded. If so and
before use, please raise up the backrest.
Please carefully and thoroughly follow the instructions for assembling the massage chair.
The massage chair is packaged with the massage chair back lying flat. Before operation,
the massage chair back will need to be put to the upright position using the controller. If
the backrest cover is not already zippered onto the top of the backrest of the massage
chair, then you will need to install it. You can do this by attaching the backrest cover
using the zipper on the top of the backrest of the massage chair.
When using the massage chair, do not operate the massage chair in a humid
environment. Be sure not to drastically change the room temperature in which the
massage chair resides. Drastic changes in room temperature can lead to rusting of the
metal parts and greatly affect the operation of the massage chair causing damage.
Massage Chair Placement
–
Please be sure to have a clearance in front and behind the
massage chair of approximately 20”/50 cm to prevent it from touching any objects or
walls in the declined position.
(backrest cover installation is not
applicable to all massage chair
models)
Over 20”/50cm
Over 20”/50cm
-9-
