II.
Massage Selections (MANUAL)
To use the Manual mode, you must select the Roller button or Airbag button after turning
the massage chair ON at the controller. The Manual mode allows you to combine your
desired massage functions. You can adjust the massage speed, massage area, and
massage strength.
III.
Start Massage
Once the power cord is plugged into the wall outlet and connected to the massage chair,
the red LED light will illuminate. Press the ON/OFF button and the massage chair will be
in standby mode. The screen will alert the user to choose the massage function.
IV.
Select Function
A.
Auto Program
Press the AUTO button to enter into the automatic massage menu. Move the
cursor using the arrow buttons to choose your desired function or preset setting.
Before the AUTO massage program begins, the massage chair will enter into the
body scanning mode to detect your body shape. Be sure to sit all the way back
into the massage chair.
B.
Manual Program
Press the Zero Gravity, Roller, or Air button and you will be able to combine your
desired massage functions. During the massage, you can adjust the strength,
massage points, and massage areas. There are hundreds of massage functions
to choose from. You can use the arrows to choose selections and then enter.
-18-
