1.
Power Cord and Receptacle:
One end of the power cord with be connect to the applicable connection on the massage
chair, usually at the lower rear of the massage chair. The other end will be connected to the
wall receptacle.
Make sure the main power switch on the massage chair is turned OFF
before plugging the end into the wall receptacle.
Do not attempt to make any
modifications or repairs on the massage chair on your own. Conact your dealer for
any needed repairs.
2.
Main Power Switch
Turn the main power switch to the ON position on the massage chair, usually at the lower
rear of the massage chair. After you turn the main power switch to the ON position, the
massage chair will go into standby mode. Prior to pressing the START button, you will only
be able to adjust the seat angle and the leg part angle.
3.
Controller
A.
Switch:
Allows you to enter or exit the standby mode.
When the main power switch is pressed to ON, the
red indicator light will illuminate. When the main
power switch is pressed again to OFF, red light will L ---
turn off.
B.
Emergency Stop:
The Emergency Stop button should
be pressed in the case of an emergency or if you
feel discomfort or if the massage chair malfunctions.
Once pressed, the airbags will deflate and moving
parts will stop operating. A --- ---B
C.
Automatic Mode:
There are 8 optional automatic
massage settings. Press any of the buttons and C ---
the corresponding automatic massage setting will
start to operate. You will be able to adjust the --- D
massage strength, 3D smart function, and the
heat. E --- --- F
D.
Manual Mode:
There are 4 optional manual modes. G ---
You can choose the massage strength, judo massage,
foot massage, and hot compressing base on your H --- --- I
preference. You will be able to adjust the massage
strength, 3D smart function, judo strength, force J --- --- K
strength, massage width, and the massage range.
-9-
