Before Use
Please carefully and thoroughly follow the instructions for assembling the massage chair.
The massage chair is packaged with the massage chair back lying flat. Before operation,
the massage chair back will need to be put to the upright position using the controller.
When using the massage chair, do not operate the massage chair in a humid
environment. Be sure not to drastically change the room temperature in which the
massage chair resides. Drastic changes in room temperature can lead to rusting of the
metal parts and greatly affect the operation of the massage chair causing damage.
Massage Chair Placement
–
Please be sure to have a clearance in front and behind the
massage chair of approximately 20”/50 cm to prevent it from touching any objects or
walls in the declined position.
o
Do not use the massage chair in the bathroom or any other humid
environment.
o
Make sure the massage chair is assembled and operated on a flat level,
non-slippery floor.
o
Do not use the massage chair in dusty and high ambient temperature
environments. The ambient room temperature needs to be below
104
o
F/40
o
C.
o
Do not place the massage chair in direct sunlight or near heating
equipment.
o
Do not smoke or operate the massage chair near any open flames.
Proceed in laying a rug (or cardboard) under the massage chair to prevent damages
to your floor. This is optional and will reduce operational noises. Never place the
massage chair on and electric blanket/rug.
Make sure the floor which the massage chair will be placed on can support the
massage chair. Be careful not to damage your floor by dragging the massage chair.
The placement of the massage chair needs to be at least 3.5 ft away from any and all
audio devices such as a television or radio to avoid product interference.
The weight limit of the massage chair is 220lbs/100kgs.
-11-
