- 11 -
NOTICE!
A
、
Be careful to the machine weltered when the machine working on
the abrupt surface.
B
、
Turn the engine switch to the OFF position when stop working.
C
、
Do not allow to the machine work on the severity harden surface.
STOPPING THE ENGINE
To stop the engine emergency, simply turn the engine switch to the OFF
position.
1.
Set the speed control lever at MIN (low
speed) position and allow the engine to
run at low speed for 1 or 2 minutes
before stopping.
2.
Turn the STOP SWITCH
counterclock-wise to the position “○” (OFF).
3.
Close the fuel valve.
PREVENTATIVE MAINTENANCE AND ROUTINE SERVICE
PLAN
CAUTION
!
1
、
Make sure the engine is off before you begin any maintenance or
repair and remove the spark plug.
2
、
Remember that your servicing dealer knows your engine best and is
fully equipped to maintain and repair.
3
、
Preventative maintenance and routine service are essential to the
long life of your machine.
4
、
Disassembly parts
:
Notice
!
Please according to as follow while you need disassemble
Summary of Contents for TRE-75 TAMPING RAMMER
