- 14 -
y2year
s)
Overhaul engine if necessary
●
Tamping rammer
：
Each
use
After month
or 50 hrs
Every 6
months or
150 hrs
Every year
or 300 hrs
Check the oil lever sight
plugs
√
Check fastening screws
√
√
√
Check for tightness engine
√
√
√
Change oil
√
√
Check
fastening
other
screws
√
√
√
ENGINE OIL CHANGE
Drain the used oil while the engine is warm. Warm oil drains quickly and
complete.
1
、
Place a suitable container below the engine to catch the used oil, and
then remove the oil filler cap/dipstick, oil drain plug and washer.
2
、
Allow the used oil to drain completely, and then reinstall the oil drain
plug and new washer, and tighten the oil drain plug securely.
3
、
With the engine in a lever position, fill with the recommended oil to
the upper limit mark.
4
、
Screw in the oil filler cap/dipstick securely.
Engine oil capacity: 14oz. (0.4l)
Summary of Contents for TRE-75 TAMPING RAMMER
