- 6 -
CHECK BEFORE
OPERATION
1. Oil level check
.
CAUTIONS!
Running the engine
with a low oil level or without oil
can cause engine damage.
a.
Remove the filler cap/dipstick and check the oil level shown on the
dipstick.
b.
If the oil level is low, fill to the edge of the oil filler hole with the
recommended oil. When you talk something with me
SAE 10W-30 is recommended for general use. Other viscosities shown
in the chart may be used when the average temperature in your area is
with the recommended range.
CAUTIONS!
Use not depurative lubrication or 2-cycle lubrication can
cause engine damage.
Recommend the engine operation climate:
-
15
℃-
40
℃(
5°F
-
104°F
)
2. CHECK AIR CLEANER
NOTICE!
Operating the engine without an air filter, or with a damaged
air filter, will allow dirt to enter the engine, causing rapid engine wear.
This type of damage is not covered by the Distributor’s Limited
Warranty.
Summary of Contents for TRE-75 TAMPING RAMMER
