Dynamite Ultra AC/DC Charger/Cycler
www.DynamiteRC.com 9
Message during ni-Mh Discharging
Press and hold the START button for 3 seconds
to begin discharging.
NOTE: Discharge voltage rates are per pack,
not per cell. Do not choose a discharge cutoff
voltage below .8V/cell or damage to the battery
may occur.
NiMH 000 : 01 : 0001
DIS 0.10A 7.62V
See the status by turning switch to left/right.
Input 13.01V
System Temp 36°C
1. Input Voltage/System Temperature
Bat Temp
29°C
2. Battery Temperature
Batt Temp Cutoff
ON 50°C
3. Max Discharge Temperature
ni-Mh Discharge/Charge
Cycle Mode
NiMH Dhg>Chg 01
1.0A/6.0V ->4.0A
The screen above is displayed when the charger
is set to charge after the discharge period.
NiMH Chg>Dhg 01
4.0A->1.0A/6.0V
The above screen is displayed when the charger
is set to discharge after charging.
Message during ni-Mh Discharging/
Charging Cycle
NiMH 000 : 01 : 0001
D>C 0.10A 7.62V
The screen above shows discharge then charge
status.
NiMH 000 : 01 : 0001
C>D 0.10A 7.84V
This screen is displayed during the charge then
discharge mode.
