Dynamix 8Ports 4-Band VDSL IP DSLAM User’s Manual V.3
Priority Queue Service settings:
First Come First Service:
The sequence of packets sent is depend on arrive order.
All High before Low:
The high priority packets sent before low priority packets.
Weighted Round Robin:
Select the preference given to packets in the IP DSLAM high-priority queue.
These options represent the number of high priority packets sent before one low priority packet is sent. For example,5 High
: 2 Low means that the IP DSLAM sends 5 high priority packets before sending 2 low priority packet.
Enable Delay
Bound:
Limit the low priority packets queuing time in IP DSLAM. Default Max Delay Time is 255ms. If the low
priority packet stays in IP DSLAM exceed Max Delay Time, it will be sent. The valid range is 1~255 ms.
NOTE:
Make sure
of “Max bridge transit delay bound control” is enabled before enable Delay Bound, because Enable Delay
Bound must be work under “Max bridge transit delay bound control is enabled” situation.
QoS Policy: High Priority Levels:
0~7 priority level can map to high or low queue.
31
Return to the catalogue.
