FXS Gateway Overview
After the FXS Gateway is properly set up, you can make future changes to the configuration
through telnet connections
1.8 Setting Up the TCP/IP Protocol
If you are not sure whether the TCP/IP Protocol has been installed, follow these setups to check,
and if necessary, install TCP/IP onto your PCs.
Step 1.
Click the “Start” button, Choose “Settings”, then “Control Panel”. Double-click the
“Network” icon. Your Network window should appear as follows.
Step 2.
Select the “Configuration” tab.
Import:
For Windows 2000 & Windows XP Setting, you will find that they differs with Windows
98/ME/NT slightly. See the Following for reference.
n Status
” windows, click the “
Properties
” button the your
Step 3.
an be installed for a computer’s Dial-Up
or the Ethernet cad.
Step 4.
Select Network Component Type or highlight
Step 6.
TCP/IP
Step 7.
Properties windows consist of several
Step 8.
y
Note than no two
Step 9.
S Configuration
” tab and select “
Enable DNS
”. Then click
Step 10.
lt
dd” Button.
Click the “Local Area Connection” icon on the lower right hand side of your desktop
screen.
In the “
Local Area Connectio
Network windows will appear.
There is only one tab, “
General
”, in the Network window.
Click whether the TCP/IP Protocol has already been installed onto your computer’s
Ethernet card. Note that TCP/IP Protocol
Adapter as well as f
- If yes, go to step 7.
- If no, click the “Add” button
Double-click “
Protocol
” in the
“
Protocol
” then click “
Add
”.
Step 5.
Highlight “
Microsoft
” under the list of manufactures
After a new second, you will be returned to the Network window. The
Protocol should now be on the list of installed network components.
Click the “
Properties
” button. The TCP/IP
tabs. Choose the “
IP Address
” tab.
Select “
Specify an IP Address
” and enter “
10.1.1.1
” in the “
IP Address
” location
(where xxx is a number between 2 and 254 used by the FXS Gateway to identif
each computer), and the default “
Subnet Mask ”255.0.0.0
”.
computers on the same LAN can have the same IP address.
Click on the “
DN
the “
Add
” button.
Click on the “
Gateway
” tab and enter the High-Performance FXS Gateway defau
gateway value
10.1.1.254
in the “
new gateway
” field, then click “A
FXS Gateway Overview
1-9
