FXS Gateway Overview
Initial Configuration
3-7
5
5
UDP
26384
192.168.1.11
26384
v
6
6
UDP
26394
192.168.1.11
26394
v
7
---
0
0
x
8
---
0
0
x
9
---
0
0
x
10
---
0
0
x
Note:
1. Different Vendor’s Router will have different appearance of setting.
2. Once you set the DMZ Host, you don’t need to configure the Port Forwarding and vice
versa.
3. If there is only one FXS Gateway attached to the IP Sharing device, it is recommended
to use DMZ Host setting to enable the NAT traverse and disable the Port Forwarding.
4. If there are two or more sets of FXS Gateway attached to the IP-Sharing device, please
configure the Port Redirection (Forwarding) to enable the NAT traverse and disable the
DMZ Host.
5. After the IP Sharing configuration of FXS Gateway and IP Sharing device is complete,
you must reboot the FXS Gateway to activate the new settings.
