Command with FXS Gateway
Ringback Tone tone1 on : 2000
Ringback Tone tone1 off : 4000
Ringback Tone tone2 on : 2000
Ringback Tone tone2 off : 4000
usr/config$
Figure 19-34 phone –print rbt commend list
Note:
For tone simulation, FXS Gateway adopts dual frequencies as traditional telephone
does. If users want to have their own call progress tone, they can change the value of
tones. High and Low frequency/level/cadence can be configured respectively.
-ring
to set RING tone value.
The played tone type, when FXS Gateway is receiving a call.
-rbt
to set RingBackTone value
The played tone type, when FXS Gateway receives a Q.931 Alerting message. In
condition that FXS Gateway is the originate side.
-bt
to set BusyTone value.
The played tone type, when destination is busy.
-dt
to set DialTone value.
The played tone type, when hook off a phone set of workable FXS Gateway.
-flash
set the detective flash range in ms, for example, 300-500 ms.
19.7.18 [rom]
ROM file information and firmware upgrade function.
usr/config$ rom
ROM files updating commands
Usage:
rom [-print] [-app] [-boot] [-dsptest] [-dspcore] [-dspapp]
-s TFTP/FTP server ip -f filename
rom -print
-print show versions of rom files. (optional)
-app update main application code(optional)
-boot update main boot code(optional)
-boot2m update 2M code(optional)
-dsptest update DSP testing code(optional)
-dspcore update DSP kernel code(optional)
Command List
19-34
