FXS H.323 VoIP Gateway User Manual
Gateway line information and configuration
Usage:
line [-config number [hunt number][hotline number][forward number]]
line -print
Gateway line information.
-config Set Gateway line information.
hunt: Hunting group.
hotline: Hot line configuration.
forward: No answer forward for FXS line.
Example:
line -config 1 hunt 1 hotline 1003 forward 1002
usr/config$
Figure 24-24 line commend list
Parameter Usages:
-print: print out all current settings of line
-config: determine which line to configure
--hunt: Set hunting group flag of each line. User can assign different hunt group number
represent different hunt group.
--hotline: Set hotline table. The Hotline Mode is applied in limited two channels. User
just picks up the phone set of one FXS TEL or calls in one FXO line, and gateway
will automatically dial out a phone number. In the other hand, user will hear ring
back tone or dial tone immediately depended on configurations of destination
device.-forward: Set no answer forward table.
For example:
usr/config$ line -print
Line information and configuration
Index Type Hunt Hotline
No Answer Forward Registration Status
========================================================
1
FXS 1
x
x
No
Ready
2
FXS 2
x
x
No
Ready
3
FXS 3
x
x
No
Ready
4
FXS 4
x
x
No
Ready
usr/config$
Figure 24-25 line -print commend
- 108 -
