FXS H.323 VoIP Gateway User Manual
Protocol :
TCP/IP
Device :
PPP/PPPoE
DNS primary
: 168.95.1.1
DNS secondary
: 168.95.1.2
HTTP port
: 80
SNTP :
mode=1
server 168.95.195.12
time zone : GMT+8
cycle=1024 mins
IPSharing
: no IPSharing device.
IP change
: Disable
PPPoE user name
: 84460791@hinet.net
PPPoE password
: ********
PPPoE reboot
: Yes
usr/config$
24.4.8
H.450 Call Hold, Transfer and Forward Mode
Gateway provides H.450 function including call hold, transfer and forward. Please be noted
that both calling and called site have to support H.450 feature. For call forward function, it only
works under GK mode. Of course, GK must support H.450 feature.
To enable H.450 feature, it is better for user to prepare a telephone set supported [FLASH]
function on keypad. If telephone set does not support [FLASH] function on keypad, user is
possible to click the Hook quickly by sending FLASH message. The default FLASH value for
Gateway is between 100ms to 300 ms. It is said the value of Gateway is subject to the telephone
set.
¤
Call Hold – press [FLASH]
By pressing the FLASH after making a call, both site shall hear the 2nd dial tone generated
by Gateway. To retrieve the call back, just press the FLASH again.
¤
Call Transfer – press [FLASH], then [transferring number]
For example, A call B, B transfer to C
A make call to B, B press FLASH. A and B hear 2nd dial tone. B presses the C’s number. C
ringing and A hear the RingBack tone. B Hang up its call. A and C Make call.
¤
Call Forward:
¤
Activate - *147#
¤
Deactivate - *258#
¤
Busy Forward – [Forward No.] *#
- 88 -
