-
WAN IP Address:
Set WAN IP Address of IAD
-
Subnet Mask:
Set the Subnet Mask of IAD
Dynamix IAD -162 Gateway
-
Default routing gateway:
Set Default routing gateway of IAD
-
NAT:
Enable / Disable the Network Address Translation function
-
DNS Server Obtained:
Auto or Manual configure the DNS server, user can
manual configure the Gateway’s DNS server IP address when it is under
PPPoE or DHCP if they set it as “manual”. Default is “auto”.
-
Primary DNS Server:
Set Primary Domain Name Server IP address.
User can set Domain Name Server IP address. Once IAD can connect with
DNS server, user can specify URL address instead of IP address for Proxy and
phone book IP address.
-
Secondary DNS Server:
Set Secondary Domain Name Server IP address.
-
SNTP Server Address:
Set SNTP Server Address
When SNTP server is available, enable IAD SNTP function to point to SNTP
server IP address so that IAD can get correct current time.
-
GMT:
Set time zone for SNTP Server time
User can set different time zone according to the location of IAD. For example,
in Taiwan the time zone should be set as 8,which means GMT+8.
-
IP Sharing:
Enable it if IAD is behind IP Sharing router.
-
IP Sharing Server Address:
Set Public IP Address of IP Sharing router for IAD
to work behind IP sharing.
-
PPPoE User Name:
Set the PPPoE connection account in this table. Please
get this info from your ISP.
-
PPPoE Password:
Set the PPPoE connection password in this table. Please
get this info from your ISP.
-
PPPoE IP Address:
The field display the IP address. When VoIP Gateway
after the connection success, which the gateway got from the ISP.
-
PPPoE Destination:
The field display the default gateway address. When VoIP
Gateway after the connection success, which the gateway got from the ISP.
-
Reboot After Remote Host Disconnection:
Select enable or disable this
function will make the gateway restart automatically if the PPPoE connection
is disconnected or the IP address was taken back by the ISP.
-
Send PPPoE Echo Request:
When the IP mode is in PPPoE mode, select
enable or disable this function will make the gateway send echo request
packet or not.
-
EMS IP:
Set EMS server IP address.
-
EMS User Name:
Set EMS authentication user name.
-
EMS Password:
Set EMS authentication password
-
EMS Time:
Set EMS refresh time.
- 46 -