4.3.2 SIP Information Screen
Dynamix IAD -162 Gateway
Click [SIP Configuration] in the navigation panel and open the SIP Information Screen.
-
Run Mode:
Select IAD to work under Peer-to-Peer mode or Proxy mode.
-
Primary Proxy IP Address:
Set primary Proxy IP Address or URL address
(Domain Name Server must be configured. Please refer to
Network
Interface
).
-
Secondary Proxy IP Address:
Set secondary Proxy IP Address or URL
address (Domain Name Server must be configured. Please refer to
Network
Interface
). When IAD fail to register to primary Proxy, it will try to register to
secondary Proxy, when it fails again, it will retry to register to Primary Proxy.
-
Outbound Proxy:
Set IP Address or URL address (Domain Name Server must
be configured. Please refer to
Network Configure
) of outbound Proxy server.
-
Proxy port:
Set Proxy port for IAD to send message, default value is 5060, if
there is no special request of Proxy server, please don’t change this value.
-
Outbound proxy port:
Set outbound Proxy port for IAD to send message,
default value is 5060, if there is no special request of Proxy server, please
don’t change this value.
-
Prefix String:
set prefix string. If user ID contains alphabets, user can set it as
prefix string here. For example, if Account Name is 123, IAD will sent out
messages as Account Name @”IP address of Proxy”, if user set prefix as abc,
IAD will set out as abc123@”IP address of Proxy”. This function is for special
proxy server.
-
Line Number:
identify one number for the IAD to register to the Proxy.
- 48 -
