background image

 

 

121 – 18799 AIRPORT WAY, PITT MEADOWS, BC, CANADA, V3Y 2B4

  

PHONE: 604-465-0009

 

WEB PAGE: 

www.dynanav.com

 EMAIL:

 airag@dynanav.com

 

FAX: 604-465-0084

 

9

Dual Relay box 

Overview 

The dual relay box has multiple functions to interface the aircraft and the pilot to the DynaNav system. 
These functions are as follows: NOTE: THIS BOX MUST BE INSTALLED IN ALL INSTALLATIONS TO 
PROTECT THE COMPUTER. 

„

 

To interface to sense the spray on/off of the aircraft system. 

„

 

To protect the DynaNav from the electrical spikes generated by the relay action 

„

 

To protect the DynaNav system from static discharge on the control switches. 

„

 

To interface multiple styles of control switch assemblies or to the ErgoGrip™ control grip. 

Placement 

The relay box is connected directly to the DynaFlight interface harness, From the relay box two harnesses 
are connected, the spray on/off sense lines and the control switch module. This does not need to be hard 
mounted, however for vibration isolation, it would be best to Velcro or dual lock it to any secure surface. 

Wiring 

The Dual Relay wiring harness has 3 sets of wires; Spray1 and Spray2. For most installations only Spray1 
is connected to sense that the pilot is applying material. For Pressure switches on the Spray Boom, make 
sure the pressure is well within the range of the normal boom pressure for spraying. The Cessna P/N S-
3010-1 Hobbs pressure switch can be adjusted to the right pressure. You can also use a Honeywell/Hobbs 
P/N 76575 which is the same. 

Wiring Harness Diagrams 

Overview 

The diagrams attached to appendix are for the interconnect wiring of the DynaNav system. All wires on the 
harnesses supplied (except the control grip/box) 

Supplied Parts List 

Basic DynaFlight-AirAgII™ airborne system contains: 

Part Number .............................................................................. Description 

1)

 

DBII-586-GDEuroJavad .. DynaByte-AirAgII™ Processor/GPS Box 

2)

 

DV-EL320.240................... DynaViz™  Electro-luminescent display unit 

3)

 

DV-Cable-10 ..................... DynaViz-Cable 10 foot Display cable pre-wired 

4)

 

42B016A-XT-1 .................. GPS, GLONASS, L Band Antenna  

5)

 

DB-AntCable14 ................ Antenna Cable 14' TNC 

6)

 

DB-Cable.1 ....................... DynaByte control cable 1' DynaByte to Dual Relay  1 foot 

7)

 

ErgoGrip™/ Switch kit .... Military spec 5 way Top Hat control switch as well as other switches with 7 
foot cable assembly. (for Helicopters, switches provided) 

8)

 

DB-2-1224-4 ......................  Dual  relay box for dual sensing of spray on/off  

9)

 

DB2-24cable9 ...................  Spray  on/off 9 ft. wire and plug 

10)

 

DB-PowerCable ............... MS Power Cable 18"with 5' ext. 

11)

 

DynaByte-Mount Rack ... Mounting Bracket plate assembly 

12)

 

Ag Complete Key Card ... Ag Complete  Software and KEY CARD Compact Flash 

13)

 

Dual Lock.......................... 2 feet peel and stick  locking fastener 

14)

 

1500-000-180 .................... Pelican Shipping Carrying Case 

Summary of Contents for DynaFlight-AirAgII



















Reviews: