121 – 18799 AIRPORT WAY, PITT MEADOWS, BC, CANADA, V3Y 2B4
PHONE: 604-465-0009
Control Grip or Switches
Overview
The control grip contains three primary switches that control the entire system. On our supplied
ErgoGrip™, two of these switches are contained in the single 5 way Top Hat switch and the other on a
push button switch. It is the intention of the system for the pilot to have access to these switches on his grip,
cyclic or his collective or a combination of both. Other than these switches, the DynaFlight system is wired
to the dual interface box to sense spray on/off or other actions.
Placement
If the grip, cyclic or collective have a spare Top Hat switch, it can be wired directly to the connector on the
Dual Relay box along with two other push buttons for the “accept” and the “window “ operation. This Dual
Relay box should always be used as it contains the transient spike protection circuitry. If the ErgoGrip™-
Collective switch box is used, it should be attached to the collective such as to not interfere with the normal
operation and so the top hat can be operated with the thumb. The supplied ErgoGrip™ is to replace the
existing control grip on the flight control stick.
WEB PAGE:
www.dynanav.com
EMAIL:
airag@dynanav.com
FAX: 604-465-0084
7
