30
CA280 M280EN1
SPECIAL INSTRUCTIONS
The temperature limits apply to standard versions of
the roller.
Rollers that are fitted with additional equipment, such
as noise suppression, etc., may require extra observa-
tion in the higher temperature ranges.
When washing the machine, do not direct the
jet of water directly at the fuel or hydraulic fluid
tank covers. This is particularly important
when using a high-pressure washing unit.
Do not spray water directly on electric components or
the instrument panel. Put a plastic bag over the filler
cap of the fuel tank and secure with a rubber band.
This will prevent water from entering the venting hole in
the filler cap. This could otherwise cause operational
disturbance, for example, a clogged filter.
In the event of fire in the machine, use an ABE-powder
fire extinguisher if possible. A BE type carbon dioxide
fire extinguisher may also be used.
If the roller is equipped with a protective structure
(ROPS, Roll Over Protective Structure), or protective
cab, never subject the structure or cab to welding or
drilling. Never attempt to repair a damaged structure or
cab; they must be replaced with new ones.
When using an auxiliary battery to assist starting,
always connect the positive terminal of the auxiliary
battery to the positive terminal of the roller battery, and
negative to negative.
Starting aid
Protective structure (ROPS)
Fire fighting
High-pressure washing
Temperature
Standard oils and other
recommended fluids
Higher ambient temperature
max. +50°C (122°F)
Upon delivery from the factory, the various systems
and components are filled with the oils specified see
lubricant specification and they can be used at ambient
temperatures from -10°C to +40°C (14°F - 104°F).
A maximum temperature of +35°C (95°F)
applies for biological hydraulic fluid.
When operating in hotter ambient temperatures, but up
to max. +50°C (122°F), the following instructions apply:
The diesel engine can handle this temperature with the
standard oil, but the following oils must be used in the
other components:
Hydraulic system with mineral fluid: Shell Tellus TX100
or corresponding.
Other components using transmission oil:
Shell Spirax HD 85W/140 or corresponding.
Summary of Contents for CA280
Page 2: ...19 ILF015WO1 ...
Page 35: ......
