5
LG140/160/200 ILG140EN4
Always take extreme care when driv-
ing the machine on slopes. Always
drive straight up and down on slopes.
Do not exceed the maximum grad-
ability of the machine according to
the instruction book. Stay clear of
machine when operating on a slope
or in a trench.
Do not touch the engine, the exhaust pipe or
the eccentric element of the machine. They
gets very hot during operation and can cause
burn injuries.
Do not touch V-belts or rotating parts during
operation.
Parking
Park the machine on ground as level and firm
as possible. Before leaving machine:
•
Apply the parking brake.
•
Shut off the engine and pull the ignition key
out.
Loading/Unloading
Never remain under or in the immediate
vicinity of the machine when it is lifted
by a crane. Only use marked lifting
points. Always make sure that all
lifting devices are dimensioned for
the weight of the products.
Maintenance
Maintenance work must only be carried out by
skilled personnel. Keep unauthorized persons
away from the machine. Do not carry out main-
tenance work while the machine is moving or the
engine is running.
Filling with fuel
(Gasoline/diesel)
Petrol has an extremely low flash-
point and can be explosive in certain
situations. Do not smoke. Make sure
that worksite ventilation is good.
Keep away from all hot or spark-generating ob-
jects when handling fuel. Wait until the machine
has cooled before filling the tank. Fill the tank
at least 3 metres away from where you intend
to use the machine. Avoid spilling petrol, diesel
or oil on the ground. Protect your hands from
contact with petrol, diesel and oil.
Open the tank cap slowly to release any over-
pressure that might exist in the tank. Do not
overfill the tank. Inspect the machine for fuel
leakage regularly.
Do not use a machine that is leaking fuel.
Starting the machine
Before starting read instruction
book and make your self familiar
with the machine and make sure
that:
• All handles are free from grease, oil and dirt.
• The machine does not show any obvious
faults.
• All protective devices are securely fastened in
their places.
• All control levers in ”neutral” position.
Start the machine according to the instruction-
book.
Operation
Keep your feet well clear of the
machine.
Do not operate the machine in
poorly ventilated spaces. There is a
risk of carbon monoxide poisoning.
Use the machine only for the purpose for which
it is intended. Make sure you know how to stop
the machine quickly in the event of an emergency
situation.
SAFETY INSTRUCTIONS (FOR ALL LIGHT PRODUCTS)
