background image

10

ILH800EN2

ENGINE OIL

Use SAE 15W/40:
1,9 litre (2.0 qts) Shell Universal Engine Oil TX15W-40

ECCENTRIC OIL

Use SAE 15W/40:
0,5 litre (0.55 qts) Shell Universal Engine Oil TX15W-40

HYDRAULIC FLUID

Hydraulic fluid, recommendation:
27,0 litre (7.1 gal) Shell Tellus TX68 or equivalent

BIODEGRADABLE

Shell Naturelle HF-E46

HYDRAULIC FLUID

On delivery from the factory the machine may have been filled
with biodegradable fluid. Always use the same type of oil when
changing or topping off.

FUEL

Use diesel oil which satisfy EN 590 or DIN 51601
7,0 litre (7.4 qts)

Service parts P/N

Hatz 1D90V

Engine air filter element

23 94 23

Engine oil filter

23 93 26

Engine fuel filter

93 74 30

LH800

Hydraulic filter

28 41 79

FUEL AND LUBRICANTS

Stop the engine before refilling the fuel tank.
Never refuel near an open flame or sparks,
which could start a fire. Don't smoke. Use
pure fuel and clean filling equipment. Take
care not to spill fuel.

The oil volume is 0,5 l from S/N 80030215. This
volume is also sufficicant on previous machines.
See Service Information (SI) SI 03004.

WARNING

CAUTION

Summary of Contents for LH800































Reviews: