background image

18

ILH800EN2

Right

Forward

Left

Reverse

Control

The positions of the remote control joystick have the
following functions:

Forward

The machine moves forward.

Reverse

The machine reverses.

Right

The machine rotates to the right.

Left

The machine rotates to the left.

0

Vibration and the machine stop if the joystick
is released.

0

1. Give full throttle by setting the speed switch (2) to

“high” (hare).

Make sure that the working area is safe. Wet
and loose ground reduce the machine’s
operating ability, especially on slopes.

Never leave the machine with the engine
running, always switch off the master switch
(14) when leaving the machine. Do not allow
passengers on the machine.

Do not operate the machine at a greater
distance than 20 metres (22 yards). Always
keep the working area and the machine
under good supervision.

Never give the transmitter to anyone who is
not fully conversant with the machine, its
operation and safety directives.

Repeated high speed setting is only possible
after 30 sec of low speed.

Operating

2. Speed switch, High/Low

OPERATION – RADIO REMOTE CONTROL UNIT

L000338A

2

WARNING

WARNING

WARNING

WARNING

CAUTION

Summary of Contents for LH800































Reviews: