32
LP8500 ILP8500EN1
Caution! of scalding due to hot oil.
Catch running out hydraulic oil and dis-
pose of environmentally.
1. Place a receptacle of at least 20,0 lit. (5.3 gal) under
the hydraulic oil tank. Clean the area around, and
remove the oil drain plug (1).
2. Remove the cover on the hydraulic tank and clean it
on the inside.
3. Assemble the cover and drain plug again with new
sealing.
4. Change the filter element.
5. Fill with hydraulic fluid.
6. Check the oil level meter (3); see under the "Mainte-
nance-Every 10 hours of operation" heading.
Clean the fuel tank.
1. Place a receptacle of at least 17 litres (18 qts) under
the fuel tank on the left side on the machine.
Clean the area around, and remove the drain
plug (1).
2. Drain the tank and clean. Refit the drain plug with
new seal.
3. Refill the tank. And check that there is no leaks.
Replace the Hydraulic Oil and
the Hydraulic Filter
1
MAINTENANCE – EVERY 1000 HOURS
L000364C
WARNING