Machine description
IPL350TD-1EN2.pdf
2012-06-18
Functional description of control panel
No
Designation
Symbol
Function
No
Designation
Symbol
Function
1
Rotating beacon
Activate the rotating warning lights by pressing down
the switch in position 1.
1
Rotating beacon
Activate the rotating warning lights by pressing down
the switch in position 1.
2
Lights, switch
Position 0 Lights off
Position 1: Driving lights (dipped, operating lights)
Position 2: Working lights (headlights, dipped,
operating lights)
2
Lights, switch
Position 0 Lights off
Position 1: Driving lights (dipped, operating lights)
Position 2: Working lights (headlights, dipped,
operating lights)
3
Gear position switch
Position 1: Transport mode
3
Gear position switch
Position 1: Transport mode
Position 2: Working mode
Position 2: Working mode
Position 3: Working gear + differential lock. Used when
one of the wheels spins.
Position 3: Working gear + differential lock. Used when
one of the wheels spins.
Switching between positions is only possible when the
control lever is in neutral.
Switching between positions is only possible when the
control lever is in neutral.
4
Speed setting
Variable limitation of max. speed.
Min. position: Idling
Max. position: Nominal
4
Speed setting
Variable limitation of max. speed.
Min. position: Idling
Max. position: Nominal
5
Forward/Reverse lever
Forward/Reverse: Variable adjustment of operating
speed.
Neutral position: The engine can be started on idle.
Machine braked. Max. speed set with the preset
control.
5
Forward/Reverse lever
Forward/Reverse: Variable adjustment of operating
speed.
Neutral position: The engine can be started on idle.
Machine braked. Max. speed set with the preset
control.
6
Horn
Press to sound the horn.
6
Horn
Press to sound the horn.
7
Ignition key
Position P: Parking lights on.
Position 0: The electric circuit is broken. Secondary
brake on.
Position I: All instruments and electric controls are
supplied with power.
Position II: Start function.
7
Ignition key
Position P: Parking lights on.
Position 0: The electric circuit is broken. Secondary
brake on.
Position I: All instruments and electric controls are
supplied with power.
Position II: Start function.
The engine can only be started if the control lever
is in neutral, when the cutter drum is not engaged,
and when the raise/lower switch is in neutral.
The engine can only be started if the control lever
is in neutral, when the cutter drum is not engaged,
and when the raise/lower switch is in neutral.
8
Milling drum drive
Press the switch to activate the driving of the milling
drum. The lamp indicates function selection.
Press the switch again to deactivate the milling drum.
8
Milling drum drive
Press the switch to activate the driving of the milling
drum. The lamp indicates function selection.
Press the switch again to deactivate the milling drum.
The machine must not be lowered down low enough
for the milling drum to be in contact with the surface
when starting the milling drum.
The machine must not be lowered down low enough
for the milling drum to be in contact with the surface
when starting the milling drum.
The drive can only be activated when the working
gear is engaged and the control lever is in neutral.
The drive can only be activated when the working
gear is engaged and the control lever is in neutral.
9,
10
Chassis leg, left/right raise/lower
Lever, forward: Raising the machine Lever, reverse:
Lowering the machine
9,
10
Chassis leg, left/right raise/lower
Lever, forward: Raising the machine Lever, reverse:
Lowering the machine
To raise the machine evenly, activate the right and left
sides simultaneously
To raise the machine evenly, activate the right and left
sides simultaneously
26
Summary of Contents for PL350 TD
