DYNAPULSE DP-200M/Education, Quick Manual

www.DynaPulse.com 

1

Quick Guide for  

DP-200M/Education 

(USB)

Congratulations, and thank you for choosing the USB-Version PC 

based DynaPulse 200M/Education non-invasive blood pressure 

monitoring and recording system. 

Note:  This USB Version DynaPulse (DP-200M/Education/USB) blood pressure monitor applies 

standard PC-USB connection to provide Serial DATA communication and DC power to DynaPulse 
monitor.  USB drivers and DynaPulse software must be installed to your PC for proper operation of 

DynaPulse monitor. 

I. Install software and getting ready: 

 
Before you start installing DP-200M/Education/USB hardware and software, please check and make 
sure you have following items ready: 



DP-200M/Education/USB monitor   



USB communication cable 



Blood Pressure cuff assembly (Use appropriate size cuff) 



DP-200M/Education/USB software for Windows CD (Include USB drivers) 



A PC with Windows operation system (Windows 2000, XP, Vista or Win-7), and an available 
USB communication port.   

 
Getting ready with DP-200M/Education/USB monitor and connect it to a PC: 



Install USB drivers: Following instructions on provided Software CD to install correct USB 
drivers to your PC. 



Connect USB cable, one end to DP-200M and the other end to PC’s USB- port. 



Connect Cuff assembly to DP-200M (Use appropriate size cuff for each patient.)