USING THE SECURELOCK
5
6
• To lock the mechanism extend the two
parts of the walker so that the mecha-
nism closes.
Locking Lever
Groove
Locking
Lever
STEP 4:
To Attach Basket
• Line up the back of the basket and slide it
down over the hooks of the post.
• Push it down until it is securely in place.
• To remove the basket, lift the basket up.
STEP 5:
To Use and Adjust the Brakes
• The Knee Walker’s brake is similar to a
bicycle and also has a locking feature.
• Do not use the Knee Walker if the brake
system is not working properly.
• Use an Allen Wrench to loosen the hand
lever to reposition locking mechanism
and re-tighten to a comfortable position.
• The brake tightness can be adjusted with
the nuts at either end of the brake cable.
Turning the screw counterclockwise will
loosen the brake and turning the screw
clockwise will tighten it.
• To use the brake, squeeze the hand
brake lever.
• To lock the brake, squeeze the hand
brake lever and push down on the brake
locking button to secure a full lock. When
done correctly, brake locking button will
stay locked in the downward position.
• To release brake, squeeze the hand
brake lever again and the brake locking
button will pop up automatically.
Release
Pin
Release Pin Hole
• When mechanism is properly closed the
release pin will be fully engaged in the
release pin hole.
