dynarex 10702, Quick Start Manual

6

7

OPERATING THE PATIENT LIFT

Closing/opening the legs of the  

lift base

Stand at the rear of the lift and grasp the 

shifter handle. Swivel the shifter handle to 

open and close the legs of the base. 
The shifter handle MUST be positioned 

completely into its mounting slot. DO NOT 

use the patient lift until shifter handle is 

properly seated and the legs of the patient 

lift are locked in place. Otherwise, injury 

and/or damage may occur.

Raising/lowering the  

electric patient lift

To raise the patient lift, press the UP 

button (  up arrow). 
To lower the patient lift, press the DOWN 

button (  down arrow). 

EQUIPMENT OPERATION

Assembling the control box  

to the mast

1.  Temporarily remove the screw on  

the mast mounting bracket for the 

control box. 

2.  Secure the control box onto the 

mounting bracket on the mast with  

the screw.

3.  Plug in the electrical connectors  

from the actuator to the bottom of  

the control box.

4.  Slide the battery onto the mounting 

bracket above the control box. Make 

sure there is an audible click when  

the battery is mounted in place.

Installing the shifter handle

1.  Line up the shifter handle opening with 

the threaded connector at the base.

2.  Turn the shifter handle clockwise and 

securely tighten into the base.

Base Closed

Base Open

Shift Handle  

to left

Shift Handle  

to right

Battery

Control Box & 

Battery Mounting 

Bracket already 

secured to  

the mast

Shifter Handle

Threads

Screw

Control Box

Emergency Stop Button

Actuator Cord Socket

Bottom View of Control Box