Spa Operator’s Guide
Sec1:22
(XM2) WIRING CONNECTIONS
Make sure all accessories are linked to the bonding connector and connected
to the pack.
Make sure the spa pack door is closed.
Turn on the breaker.
It’s important to specify the phase configuration setting at the power supply:
Single-phase (1P), Dual- phase (2P) or Three-phase (3P).
Press select button to select the proper phase configuration setting.
The in.scan display will show “x P”, with “x” representing the number of
phases of the electric power system.
RCD
Br
1 X 32 A
1 P
2 X16 A
2P
3 X 16 A
3 P
Use change button to go from one parameter to the next.
Press select button again to make the correct selection.
All receptacles will match the corresponding female connection on the spa
pack.
No connectors should remain unplugged. Use blank plugs to fill unused
connectors.
13
in.xm.ce
powering up the unit
Make sure all accessories
are linked to the bonding
connector and connected
to the pack.
Make sure the spa pack door is
closed.
Turn on the breaker.
It's important to specify the
phase configuration setting
at the power supply : Single-
phase (1P), Dual- phase (2P) or
Three-phase (3P).
Press
Select
button to select
the proper phase configuration
setting.
The in.scan display will show
"
x P"
, with "
x
" representing
the number of phases of the
electric power system.
RCD
Br
1 X 32 A
1 P
2 X16 A
2P
3 X 16 A
3 P
Bonding lug
Use
Change
button to go from
one parameter to the next.
Press
Select
button again to
make the correct selection.
All receptacles will match
the corresponding female
connection on the spa pack.
No connectors should remain
unplugged. Use blank plugs to
fill unused connectors.
13
in.xm.ce
powering up the unit
Make sure all accessories
are linked to the bonding
connector and connected
to the pack.
Make sure the spa pack door is
closed.
Turn on the breaker.
It's important to specify the
phase configuration setting
at the power supply : Single-
phase (1P), Dual- phase (2P) or
Three-phase (3P).
Press
Select
button to select
the proper phase configuration
setting.
The in.scan display will show
"
x P"
, with "
x
" representing
the number of phases of the
electric power system.
RCD
Br
1 X 32 A
1 P
2 X16 A
2P
3 X 16 A
3 P
Bonding lug
Use
Change
button to go from
one parameter to the next.
Press
Select
button again to
make the correct selection.
All receptacles will match
the corresponding female
connection on the spa pack.
No connectors should remain
unplugged. Use blank plugs to
fill unused connectors.
13
in.xm.ce
powering up the unit
Make sure all accessories
are linked to the bonding
connector and connected
to the pack.
Make sure the spa pack door is
closed.
Turn on the breaker.
It's important to specify the
phase configuration setting
at the power supply : Single-
phase (1P), Dual- phase (2P) or
Three-phase (3P).
Press
Select
button to select
the proper phase configuration
setting.
The in.scan display will show
"
x P"
, with "
x
" representing
the number of phases of the
electric power system.
RCD
Br
1 X 32 A
1 P
2 X16 A
2P
3 X 16 A
3 P
Bonding lug
Use
Change
button to go from
one parameter to the next.
Press
Select
button again to
make the correct selection.
All receptacles will match
the corresponding female
connection on the spa pack.
No connectors should remain
unplugged. Use blank plugs to
fill unused connectors.
Bonding lug
Powering up the unit
Summary of Contents for Spa & Hot Tub 2016
