OPERATION OF THE PRODUCT
1.Remote signal receiver
2.Ventilatore
3. Power button
4.Power input.
5.Hole hole for the safety rope
6.Light signals
7.Campanello / Cashier
8. Comfortable grip handle
DynaSun W110 must remain connected to the power cable to be used
How to place the product on the window
-Turn on the switch and make sure the fan is running
-Put the product on the window 10cm from the frame.
-Check that the cleaner adheres to the window before removing it.
How to remove the product from the window
-Press the Pause button on the remote control.
-While the cleaner is running, hold the safety rope with one hand and take the product from the window
with the other. - Turn off the switch in a safe area.
Safety rope
-Make sure the safety rope is not damaged nor the fixed knot.
- Securely put the safety rope and tie it to a stable element before using the product.
Uninterrupted Power System (UPS)
-The robot must always be connected to the current at all times.
-The UPS system will automatically activate when the cleaner is not receiving power. The duration of this
system is 30 minutes,
-Without power supply, the product will shut down automatically, sound an alarm and turn on
intermittently.
