15
Q:
Does the Dynaudio Music App support Apple Music?
A:
The Dynaudio Music App doesn’t currently support Apple Music,
however you can stream Apple Music content to your speaker via
AirPlay or Bluetooth.
Q:
Where can I find my speaker’s firmware version and serial
number?
A:
Tap the Speakers tab on the Dynaudio Music App home screen,
then tap “About Speaker”.
Q:
Can I play music from a USB memory stick?
A:
Music can be played directly from an iOS device via the Dynaudio
Music speaker USB input, however music stored on simple USB
memory sticks cannot be played.
Q:
Why does the music drop-out sometimes when playing from
music streaming services and internet radio?
A:
Streaming drop-outs are usually caused by poor internet or Wi-Fi
network service. You may find it helpful to re-start your network
router.
Q:
Can I use public or commercial Wi-Fi to connect my speaker?
A:
Dynaudio Music speakers are not able to connect to open or most
public or commercial Wi-Fi networks.
Q:
Can I connect my Dynaudio Music speaker to my TV?
A:
If your TV has an analogue or digital audio output, you can
connect it to your Dynaudio Music speaker via the Aux or Optical
inputs respectively (you’ll need a stereo phono to stereo 3.5mm
jack cable, or a Toslink optical digital cable). The Music 7 has an
HDMI socket specifically intended for connecting to TVs (you’ll
need an HDMI cable for this). In some cases, you’ll be able to use
your TV’s remote handset to control the Music 7’s volume.
Q:
How do I reset my speaker to its factory settings?
A:
Your speaker can be returned to its default settings using the
pin-hole
Reset
button located near the power socket. Use a
straightened paper-clip to press and hold the
Reset
button for
two seconds. The first volume indicator will flash red while the
reset is underway. When the reset is complete your speaker will
restart in both Wi-Fi Setup and Bluetooth Paring modes.
Q:
How do I link to TIDAL in the Dynaudio Music App if I originally
used a Facebook login to register with TIDAL?
A:
Use the TIDAL password reset system to create a new password
(select, “Forgot Password” at tidal.com). The new password can
then be used with the email address associated with your Tidal
account to link Tidal to the Dynaudio Music App.
