Troubleshooting and Technical Information
24
Dynaudio Sub 300/500
Technical specifications
All aspects relating to the performance criteria are strictly controlled. Along all stages
of the entire production progress – from raw material selection to the final assembly
and quality control – Dynaudio thoroughly inspects each parameter along every step
of way.
Subject to alterations.
Sub 500
Sub 300
Frequency response
(± 3 dB)
18 Hz – 250 Hz
25 Hz – 250 Hz
Low frequency limit with
EXT Off
27 Hz
33 Hz
Amplifier power
250 W / 4 Ohm
200 W / 4 Ohm
Cross-over frequencies
60 Hz / 80 Hz / 100 Hz
60 Hz / 80 Hz / 100 Hz
Cross-over slope
4th order, Linkwitz-Riley
4th order, Linkwitz-Riley
Cross-over bypass
Yes (FLAT)
Yes (FLAT)
Phase adjustment
0° / 90° / 180° / 270°
0° / 90° / 180° / 270°
Inputs Single
ended/RCA,
Balanced/XLR
Single ended/RCA,
Balanced/XLR
Input sensitivity for full output*
0.1 V – 5 V
0.1 V – 5 V
Maximum input
10 V
10 V
Input impedance
20 kOhm
20 kOhm
Output Single
ended/RCA,
Balanced/XLR
Single ended/RCA,
Balanced/XLR
Master/Slave link
Yes
Yes
Remote control
included
included
No. of presets
4
4
Each preset includes
level, cross-over frequency,
phase, ext. frequency range
level, cross-over frequency,
phase, ext. frequency range
Drive unit
12" (30 cm), long throw
10" (24 cm), long throw
Magnetic shielding
Yes
Yes
Internal cabinet volume
36 litres
19 litres
Bass principle
Closed
Ported
Power consumption, max.
480 W
480 W
Power consumption, standby
5 W
5 W
Mains voltage**
120 V/60 Hz or 230 V/50 Hz
120 V/60 Hz or 230 V/50 Hz
Weight (net)
30.6 kg
19.1 kg
Dimensions (W x H x D)
360 x 378 x 568 mm
320 x 338 x 466 mm
* Depended on setting.
** Please refer to your local network.
Sub300_500_en.book Page 24 Dienstag, Mai 11, 2010 5:02 PM
