DynaVox T10 User’s Guide
43
Part # 401438-
B
Important Information About Your DynaVox T10
Your DynaVox T10 device meets all necessary international safety standards and has been tested to
meet IEC 60601-1 requirements. The DynaVox T10 system is considered to be a portable device that is
intended for continuous operation, not intermittent use. This device has electrical input ratings of 12 VDC/
3.0 Amps. The device complies with Part 15, Class B of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation. The device
is also tested to Canadian standard ICES-003. To ensure safe operation of your device, you should take
care to note the following cautionary items
:
C
AUTION
Your DynaVox T10 contains a Lithium Ion battery. A safety hazard may develop when the battery
is placed in or near fires or stoves, or in locations with temperatures above 113
°
F (45
°
C). These
conditions may cause the battery to generate heat or explode.
C
AUTION
Do not perforate, disassemble or modify the battery. If you must dispose of the battery, do so in
accordance with the local laws that apply to the area where you live.
C
AUTION
For safe and proper operation of your DynaVox T10, use only chargers, batteries, and accessories
that have been approved by DynaVox Technologies.
C
AUTION
This device presents a risk of electrical shock if the casing is opened. Do not open the casing that
surrounds the device.
C
AUTION
The DynaVox T10 devices are not suitable for use in the presence of flammable anesthetics.
When you are charging your T10, remember that the main outlet that you will be using to
power the adapter must be accessible from within 6 feet (2 meters) of the device. There should
be no switches or disconnect devices in the ground conductor. The T10 devices require no
routine maintenance other than a periodic inspection of the power cords for signs of wear and
damage. If the power cords show signs of wear and damage, they should be replaced.
C
AUTION
Do not modify this equipment without authorization from the manufacturer.
C
AUTION
The device may be mounted to a wheelchair or fixed on a table. Running the device for a long time
may cause the temperature to temporarily rise to above 105
°
F (41
°
C). Please power off the
device if it is overheating.
C
AUTION
In case of need, a DynaVox technician can provide a schematic diagram or other technical files.