8
Making connections
2
Connect one end of a coaxial cable (not included) to the
RF OUT
jack on the antenna or on the cable or satellite TV box. If you are
using an antenna with twin-lead cable, you may need a
300-75 ohm adapter (not provided) to connect it to the back of
your TV. Likewise, if you are using several antennas, you may
need a combiner (not provided).
3
Connect the other end of the cable to the
ANT/CABLE IN
jack on
the back of your TV.
Notes:
Use a coaxial cable to eliminate interference and noise from radio waves.
Do not bundle the coaxial cable with the power cord or other cables.
If the antenna is not installed correctly, contact qualified service personnel
to correct the problem.
Connecting a VCR
To connect a VCR:
1
Make sure that your TV’s power cord is unplugged and the VCR is
turned off.
2
Connect an AV cable to the
AV VIDEO OUT
jack on the VCR.
3
Connect the other end of the cable to the
Video1
or
Video2
jack
on the side of your TV.
4
Connect an audio cable to the
AV AUDIO OUT
jacks on the VCR.
5
Connect the other end of the cable to the
Video1
or
Video2
audio in jacks on the side of your TV.
To play from the VCR:
1
Turn on your TV, then press
INPUT
. The
INPUT SOURCE
menu
opens.
2
Press
or
to
select
Video1
or
Video2
, then press
ENTER
.
Note:
You can also press
VIDEO
once for
Video1
or twice for
Video2
.
3
Turn on the VCR, insert a videotape, then press
PLAY
on the VCR.
Home antenna
terminal (75 ohm)
ANT. jack
Twin-lead flat cable
RF coaxial cable (75 ohm)
RF coaxial cable (75 ohm)
RF coaxial cable (75 ohm)
RF coaxial cable (75 ohm)
Twin-lead flat cable
Combiner (not provided)
300-75 ohm Adapter
(not provided)
VHF antenna
UHF antenna
VHF, UHF, or
combination
antenna
ANT/CABLE IN
Antenna, cable
TV, or satellite box
Back of TV
Side of TV
AV cable
Note
: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.
DX-L321-10A_09-0407_MAN_ENG_V3.book Page 8 Wednesday, May 13, 2009 11:38 AM