Dynex DX-L321-10A User Manual Download

Page: 27 / 32

Maintenance

Notes

If the problem is not solved by using these troubleshooting instructions,

turn off your TV, then turn it on again.

Contact us by logging on to www.dynexproducts.com or by calling DYNEX

Customer Service at (800) 304-2204 (USA and Canada only).

Maintenance

Just like with any other household appliance, the performance and life-
expectancy of your TV depends on how well you maintain it. Follow the
procedures described here to clean the TV case and the LCD screen.

Cautions:

• Make sure that the TV is turned off and the power cord is

disconnected from the power outlet before cleaning the TV.

• Never spray or pour any liquid directly onto the screen or the case.

Cleaning

• Clean your TV with a soft, dry cloth. If surfaces are extremely

dirty, use a soft cloth dampened with a small amount of
non-ammonia, non-alcohol-based, mild, non-abrasive
detergent.

• Clean the screen with a clean, soft, lint-free cloth. If additional

cleaning is necessary, apply a small amount of non-ammonia,
non-alcohol-based glass cleaner onto a clean, soft, lint-free
cloth, then wipe the screen.

Specifications

Design and specifications are subject to change without notice.
Dimensions and weight are approximate.

No picture

• Make sure that the video input cable is

correctly connected to the appropriate
terminal, and that the correct input mode is
enabled. To illustrate, when a VGA cable is
connected to display a computer screen,
the PC input mode must be enabled.

• In TV mode, verify that the antenna is

correctly connected and that the preferred
channel is enabled in the channel list. Press

MENU

and select

Channels

Channel List

• Press

MENU

and select

Picture

to adjust

the display settings.

• If you are using a Macintosh computer that

is older than a G3 model, you need a
Macintosh adapter.

No picture or the

Signal

message

appears when a VGA
cable is connected

• Make sure that the VGA cable is correctly

connected to the TV’s VGA port.

• Decrease the video resolution setting on

the computer and try again.

• Press

MENU

and select

Picture

to adjust

the display settings.

• Decrease the video resolution setting on

the computer and try again.

The picture is cut off
or appears in a
sidebar screen

• Press

ZOOM

and make sure that the

Normal

option is selected.

Poor image quality
in TV mode (such as
a cutoff picture,
snowy images)

• Check your antenna connection. If

necessary, rotate the antenna and wait up
to ten seconds for a signal.

• Reduce the use of signal splitters and

excessively long cables.

• Replace poor antenna cables and/or

connectors to improve signal quality.

• Press

ZOOM

and make sure that the

Normal

option is selected.

• Press

MENU

, select

Picture

Advanced

then adjust the

Noise Reduction

setting.

• In HDMI mode, make sure that the external

device is compatible with your TV.

Wrong, abnormal, or
missing colors

• If any colors (such as red, green, or blue) are

missing, check the video cable to make sure
that it is securely connected. Loose or
broken pins in the cable connector could
cause an improper connection.

• Press

MENU

and select

Picture

Settings

adjust the

Tint

and

Color

settings. You can

also select

Picture

Advanced

to adjust the

Color Temperature

setting.

• Connect the TV to another computer and

check to determine if the problem is with
the computer screen.

No sound

• Make sure that the audio input cable is

correctly connected to the appropriate
terminal and that the correct input mode is
enabled.

• The volume may be muted, press

(Mute)

or the

Vol+

key to turn on the volume.

• Press

MENU

and select

Audio

to adjust the

Bass

Treble

, and

Balance

settings.

• If you are using the TV speakers, press

MENU

and select

Audio

to make sure that

the

TV Speakers

option is set to

• If you are using an external audio device,

press

MENU

and select

Audio

to make sure

that the

TV Speakers

option is set to

OFF

then make sure that the volume on the
external audio device is turned on.

Problem

Solution

TV model

DX-L321-10A

TV panel

Type
Resolution
Color
Viewing angle
Contrast ratio
Brightness
Response time

31.5-inch Active matrix WXGA TFT LCD
1366 x 768 (RGB vertical stripe)
16.2 million
176° horizontal

176° vertical

3000:1
400 nits
8.5 ms

Audio/video

input

terminals

VGA (75 ohms, 0.7 Vp-p) + PC audio-in (mini-stereo)
H/V separated (TTL) for PC; fh: 30-63 kHz, fv: 50-75 Hz
HDMI 1 and HDMI 2 + RCA (L/R) stereo
TV tuner
Component 1 (Y,Pb,Pr) and Component 2 (Y,Pb,Pr) +
RCA (L/R) stereo
Composite 1 and Composite 2 + two RCA (L/R) stereo

Audio/video

output

terminals

RCA (L/R) stereo
SPDIF (optical)

Speaker

output

5W x 2 channels

Image

processor

ATI Xilleon™ 241

TV system

support