DX-WBRDVD1/DX-WBRDVD1-CA
15
6
Press or to select the wireless network you want your player to connect to, then
press
ENTER
. A
Network Setup
screen opens with the following options:
•
Connect
—Connect to this network.
•
Disconnect
—Disconnect from this network.
•
Delete
—Delete the current network.
•
WPS Pin
—Create a random PIN number password.
7
If your network does not use encryption, press or to select
Connect
, then press
ENTER
. If the wireless network is working, you should see a checkmark and a
connected message on the TV. If the message does not appear, repeat the steps above.
8
Press to go to the previous menu.
If your network uses encryption:
1
Press or to select the
Password
field, then press
ENTER
. An on-screen keyboard
opens.
2
Press or to select the first letter in the password, then press
ENTER
. Repeat
this step to enter the rest of the password. If you make a mistake, use the
Clear
key to
delete the character.
3
After you enter the password, select the red
Done
in the upper left-hand corner of the
keyboard, then press
ENTER
to close the keyboard.
4
Press or to select
Connect
, then press
ENTER
. If the wireless network is working,
you should see a checkmark and a connected message on the TV. If the message does
not appear, repeat the steps above.
To connect to a wireless network using Wi-Fi Protected Setup (WPS), see “Setting up
WiFi protection (WPS)” on page 41.
5
Press to go to the previous menu.
Connecting using a wired network
Another connection option is to use a wired router as shown in the example below.
To connect to the ethernet with a wired network:
1
Connect a network cable to the
INTERNET
jack on the back of your player and into a
wired router using a commercially available LAN or Ethernet cable
(Cat 5 or better, with RJ45 connectors).
Wired router
Back of player
Network cable
DX-WBRDVD1_11-0366_MAN_V3.fm Page 15 Monday, April 18, 2011 12:58 PM
