5.
EFIS OPERATION
This section guides you through each of the EFIS main page menu selections and their sub-menus. To enter the EFIS
menu system, press any button (except for buttons 1 and 6) directly beneath an EFIS main page. If no EFIS main page is
displayed, you must switch to a screen configuration that includes and EFIS main page as described on page 3-4.
POWER – Power on/off
When the EFIS-D10A is turned off but still has a power source via one of the three power inputs, press the far left button
to turn the unit on. Likewise, once the unit is on and no menus are displayed,
push and hold
the leftmost button to turn it
off. While power is still connected, the unit is never fully turned off. It simply enters an extremely low-power state,
allowing it to keep track of time. It is acceptable to have the EFIS-D10A on during engine crank. It immediately powers
on upon application of external power.
BARO – Setting Barometer/ Altitude
In the EFIS > BARO menu, you can adjust the
barometer/altitude setting. When the BARO menu is
displayed, the value-setting box shows the currently set
barometer value. The DEC- and INC+ buttons change the
barometer value by 1/100
th
inHg or 1 mbar, depending upon your selected units. As you change the barometer value, the
altitude indicators change accordingly. Adjust the barometer until the altitude indicators display the correct altitude for
your location or the barometer matches the current barometric pressure value.
EFIS-D10A Pilot’s User Guide
5-1
Summary of Contents for EFIS-D10A
Page 2: ......
Page 8: ...Table of Contents viii EFIS D10A Pilot s User Guide Appendix D EFIS D10A Specifications 8 8...
Page 34: ......
Page 60: ......
