EFIS Operation
5-6
EFIS-D10A Pilot’s User Guide
SETUP – Setting Preferences
Enter the EFIS > SETUP menu to make changes to
preferences. Many of the settings in this menu should only be
changed by the installer, and are described in the EFIS-D10A
Installation Guide. The preferences and settings that are relevant to the pilot and in-flight operation are explained below.
CHANGE DISPLAYED UNITS
In the UNITS submenu, you may change the system-wide
displayed units for the following units. See the
following table for a list of available units for
each displayed parameter.
In a DSAB network, unit preferences
are shared between all connected
instruments.
SET THE CLOCK
Entering the EFIS > SETUP > CLOCK menu displays the
local and Zulu times in the value-setting box. Because local
time is usually an offset in hours from Zulu time, set the
minutes value in the Zulu time portion of the box; notice that
the local time minutes setting change at the same time. Then,
set the hours for local and Zulu times independently. Once
you have set Zulu time, you should never need to change it, as it is independent of daylight saving time. When connected
Parameter
Available units
Airspeed (IAS)
Knots, miles/hour, kilometers/hour
Altitude (ALT)
Feet, meters
Temperature (TEMP)
Celsius, Fahrenheit
Barometer Pressure (BARO)
inHg, mbar
Distance (DIST)
Nautical miles, statutory miles, kilometers
Summary of Contents for EFIS-D10A
Page 2: ......
Page 8: ...Table of Contents viii EFIS D10A Pilot s User Guide Appendix D EFIS D10A Specifications 8 8...
Page 34: ......
Page 60: ......