SkyView
HDX System
General Maintenance Manual, Revision F
Page | 23
4.5
Setup Menus
Setup Menu and In-Flight Setup Menu are used for controlling the overall configuration,
calibration, and behavior of a SkyView HDX System. Information about configuring and
calibrating a SkyView HDX System is available in the
SkyView HDX System General Installation
Manual
document.
To enter the Setup Menus, press-and-hold Buttons #7 and #8 simultaneously. If the airplane is
grounded and stationary, the entire display changes to present the SETUP MENU (see
). While the SETUP MENU screen is displayed, the regular display is not available to the pilot.
If the airplane is in flight or taxiing, the display changes to a 50% page layout with the Primary
Flight Display (PFD) on the left and IN FLIGHT SETUP MENU on the right (see
). Only
a select few configuration and calibration options are available from this menu.
Figure 10: SETUP MENU
