Page | 40
SkyView
HDX System
General Maintenance Manual, Revision F
DESCRIPTION
POSSIBLE CAUSES
ROLL SERVO OFFLINE
The Roll Autopilot servo has
stopped communicating with
SkyView.
This message also displays if
Autopilot servos are not receiving
power.
YAW SERVO OFFLINE
The Yaw Autopilot servo has
stopped communicating with
SkyView.
This message also displays if
Autopilot servos are not receiving
power.
SYSTEM EVENT X
SkyView HDX has detected a
possible problem with software or
hardware.
Contact Dynon technical support.
Always have a properly certified
mechanic or repair facility remove
the unit.
TIMER EXPIRED
A DOWN timer under TOOLS >
TIMER has expired.
XPNDR FAIL
The Transponder has failed.
XPNDR NOT IN ALT MODE
The aircraft is in flight and the
Transponder is not in Alt Mode.
XPNDR WARNING MESSAGE
The Transponder has detected a
problem and notified SkyView HDX.